Jiaxing Reegu Hardware Product Co., Ltd. is China Carbon Steel Riveted Nuts Manufacturers and Custom Carbon Steel Riveted Nuts Suppliers
No.699, Chuangye Road, Tongyuan Industrial Park, Haiyan, Zhejiang Province, China
Experienced employees & experts are Always At Your Service to provide you with satisfactory products & professional instruction on technical problem solutions.
+86-18057366698 Contact UsMany users don't know the difference between high-strength nuts and general nuts. In fact, they can easily distinguish them by understanding their specifications and other characteristics. The so-called high-strength nuts are special bolts with high strength and high fatigue resistance used in special equipment or projects. Of course, generally high-strength nuts are used with high-strength bolts to achieve better use.
We generally see in the market that many bolts with M-heads are general nuts, not high-strength nuts. Grade 10 indicates the application performance grade of the bolt, and tZn is the surface treatment method.
Other types of bolts also have their own expressions, but generally threaded ones are based on the performance grade of the initial bolt: the performance grade of the nut is divided into 3, 4, 4, 5, 5.8, 6, 8, 10 from small to large. , 12 so many levels.
This symbol method means that 10 is used as an example to indicate 1/100 of the tensile strength of the bolt, which means that the tensile strength of the bolt of this grade must reach the level of 1000MPa, which may be higher than 1000MPa in practice.
GB/T3098.1 rules that the minimum tensile strength of this grade of bolts must be greater than 1040MPa. The yield ratio after the decimal point is indicated, that is, the bolt's (yield strength/tensile strength) = 0.9, that is, the yield strength = 1000*0.9 = 900MPa. The yield strength of this grade of bolts must be higher than 900MPa to be considered qualified.
Generally, we refer to the nuts of the three grades of 8.8, 10.9, and 12.9 as high-strength nuts.
It should be noted that GB/T3098.1 does not give detailed values of yield strength for these three grades of bolts, because for high-strength bolts 0.8 and 0.9 are the smaller yield strengths specified by the grade. Strength ratio, because high-strength bolts are used for very important links, there is no spot on the market, and it is necessary to book with the bolt manufacturer, so the specific yield ratio is generally produced by the buyer putting forward specific values.
Jiaxing Reegu Hardware Product Co., Ltd. is China Carbon Steel Riveted Nuts Manufacturers and Custom Carbon Steel Riveted Nuts Suppliers
No.699, Chuangye Road, Tongyuan Industrial Park, Haiyan, Zhejiang Province, China
Copyright © 2021 Jiaxing Ruigu Hardware Technology Co., Ltd. All Rights reserved.